Dual-Unit Technical Specifications (OD-24U-AC600)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| External Dimensions (H × W × D) | 1400 × 750 × 750 mm (55.1 × 29.5 × 29.5 in) | Includes 150 mm (5.9 in) heavy-duty bolted plinth base |
| Usable 19" Rack Envelope | 24U total · 580 mm (22.8 in) max rail depth | Configurable as full 24U IT or 18U IT + isolated 6U battery compartment |
| Closed-Loop Cooling Capacity | 600 W (2,047 BTU/hr) @ L35/L35 | Door-mounted industrial rotary compressor AC with high-temp alarm |
| AC / DC Input Voltage | 110–120V / 60Hz, 220–240V / 50–60Hz, or 48V DC | Low-inrush compressor start compatible with backup generators |
| Double-Wall Solar Shield | 25 mm (1.0 in) ventilated air gap + 20 mm PEF thermal liner | High-reflectance RAL 7035 outdoor polyester finish |
| Enclosure Shell Material | 1.5 mm galvanized steel inner / 1.5 mm outer (5052 aluminum option) | Continuous welded seams with poured-in-place PU or EPDM gasket |
| Battery Compartment | Isolated bottom bay with heavy-duty slide tray (200 kg / 440 lb) | Optional dedicated hydrogen vent baffle for VRLA batteries |
| Ambient Operating Range | -40 °C to +55 °C (-40 °F to +131 °F) with optional 400W heater | Automatic cooling/heating deadband prevents short-cycling |
| Standards Alignment | NEMA 250 / IEC 60529 IP55–IP65 & EIA-310-E | Built to standard; thermal test sheets available per project |
Target Applications & Operating Fit
- WISP regional aggregation sites housing core routers, GPON/XGS-PON OLTs, DC rectifiers, and 48V battery strings
- Highway and campus ITS traffic intersections running industrial PoE++ switches, fiber patch panels, and vision edge boxes
- Municipal water, pipeline, and substation telemetry pads exposed to full-day sun and blowing dust
- Deployments transitioning from single-wall fan cabinets that suffer summer optical transceiver overheating
Structural & Standards Engineering
- 600W closed-loop air conditioner maintains stable +28 °C to +35 °C internal temperature even in +50 °C sun-exposed parking or roadside pads.
- Dedicated lower battery compartment isolates heavy 48V LiFePO4 or VRLA strings from upper IT airflow and eases maintenance.
- Double-wall ventilated roof and side panels dissipate solar radiation via natural chimney convection before heat conducts inward.
- Front and rear access door option allows rapid fiber splicing and rear power distribution without removing rack chassis.
5-Parameter Engineering Modification Scope
- Dual front + rear doors with matching 3-point stainless swing handles for pass-through fiber maintenance
- Factory-integrated 48V DC rectifier shelf, DC circuit breaker distribution panel, and surge arrestor
- 400W–600W winter PTC heater with automatic dehumidification setpoint control
- Extended 850 mm (33.5 in) cabinet depth for deep carrier switches and ruggedized 2U edge servers
- Custom concrete anchor plinth height (150 mm, 200 mm, or 300 mm) for snow-drift or flood-prone verges
Technical FAQs
Why does the OD-24U-AC600 separate the battery compartment from the upper IT bay?
Isolating the lower 6U battery bay prevents battery thermal mass from blocking rack airflow, simplifies safe battery replacement without disturbing live fiber patch cords, and supports optional passive venting when VRLA batteries are used.
Is 600W enough for a 24U cabinet in Arizona or Texas summer heat?
For 250W to 420W of active IT load inside our double-wall solar-shielded shell, 600W provides reliable thermal margin up to +50 °C ambient. If your active IT load exceeds 450W in extreme desert sun, step up to the OD-32U-AC2000.
Can we order 110V/60Hz AC units for North American highway and WISP sites?
Yes. Both 110–120V/60Hz and 220–240V/50–60Hz closed-loop AC assemblies are standard build options, alongside 48V DC telecom compressor variants.
What mounting hardware is included for concrete pad installation?
The cabinet ships with a reinforced 150 mm bolted plinth base pre-drilled for M12 expansion or chemical anchor bolts, plus removable front/rear kick plates for bottom conduit routing.
Related Outdoor Network Enclosures Models
12U Pole/Pad Mount + 300W Micro-AC
Compact 12U double-wall solar-shielded cabinet pairing a 300W (1,024 BTU/hr) closed-loop compressor AC with heavy-duty pole/wall/pad brackets for WISP relays and campus fiber nodes.
View Datasheet →Flagship 32U Double-Wall + 2000W Industrial AC
Flagship 32U double-wall solar-shielded enclosure pairing a high-ambient 2000W (6,824 BTU/hr) closed-loop industrial AC with full-depth 19-inch rails for dense ITS, solar-BESS, and mining edge compute.
View Datasheet →42U Edge-Compute + 4000W AC
Full-height 42U double-wall outdoor micro-data-center enclosure equipped with 4000W (13,648 BTU/hr) closed-loop cooling and 1000–1200 mm server depth for outdoor AI/edge servers, private 5G cores, and utility BESS.
View Datasheet →